用GA-BP算法研究超音速电弧喷涂JCW-S-AM涂层显微硬度与工艺参数间的关系

采用超音速电弧喷涂设备在不同工艺参数条件下制备JCW-S-AM涂层,利用显微硬度计测定各种涂层的显微硬度.根据测试结果,运用GA-BP算法构建涂层显微硬度与喷涂电压、喷涂电流的关系模型并进行工艺参数优化.研究结果表明:喷涂电压和喷涂电流对涂层显微硬度均有影响,呈现非线性规律,并且电压和电流之间存在交互作用;通过遗传算法优化,获得的最佳喷涂工艺参数为:喷涂电压29V,电流200A.此时JCW-S-AM涂层显微硬度最大.     

Controlling the Cold Roll Forming Design Process

The cold roll forming process requires successive forming profiles to be determined and an appropriate number of profiled roll sets to be designed for the product to be rolled. This paper examines the design process and how one company has put in place a design-production control system that allows designs to be ranked in terms of quality and efficiency. In addition, consideration is given to the proportion of time given to each design task and how non-creative design activities can be automated.     

钛合金冷坩埚电磁约束铸造工艺研究

针对液态下化学性质相对活泼的钛合金,采用冷坩埚技术对电磁约束铸造工艺过程进行了试验研究,考察了工艺条件对成形坯件表面质量和内部组织的影响.结果表明:试样抽拉速度变化对表面质量和宏观组织的影响明显,加热功率虽然对组织变化影响不大,但对表面质量影响较为显著.通过优化工艺,可以获得既有较光滑铸造表面又具有一次定向凝固组织的钛合金铸件.讨论了铸造过程裂纹和组织缺陷的形成机理,获得到了表面光滑无裂纹,宏观组织为柱状晶的钛合金大尺寸圆坯.     

Microstructure and Sliding Wear Behaviour of Ni(Cr)-TiB_2 Coatings Deposited by HVOF Spraying of SHS Powders

THERMAL SPRAYING provides a large range ofcoatings,which increase the wear resistance ofsubstrates[1].One of the major coating families is thecermet,composed of hard ceramic particles with ametallic binder.The most commonly used cermetcoatings in industrial applications are based on eitherthe WC-Co or the Cr3C2-Ni(Cr)systems with WC-17wt%Co and Cr3C2-25wt%Ni(Cr)being typicalcompositions[2,3].Although WC-Co deposits are hardand wear resistant at ambient temperatures their rangeof ap…     

Thixoforging of continuous fiber-reinforced AlSi/AlMg-alloys

High strength in combination with low density is the key features for lightweight constructions in automotive and aerospace applications. Tailor-made fiber reinforcements in light-metal matrices could help to achieve this goal. However, the integration of fibers with conventional casting-route manufacturing techniques like squeeze casting or diffusion bonding restricts the component geometry and results in elevated process cost due to long cycle times and the need of additional fiber coatings. In the center of competence for casting and thixoforging Stuttgart (CCT), new processes for manufacturing metal matrix composites are developed. Long-fiber reinforced Al–Si alloys and components are produced by thixoforging of laminates made of alternating metal matrix layers and carbon fiber fabrics. This paper illustrates the manufacturing technology and first experimental results with special focus on fiber penetration and infiltration behavior and also on the formation of fiber-matrix interface to analyze fiber damage by mechanical or chemical attack.     

Ni－Cr－B－Si合金粉末等离子喷涂层的高温性能及其在滚锻模上的应用

研究了Ｎｉ－Ｃｒ－Ｂ－Ｓｉ合金粉末等离子喷涂层的高温抗氧化性能、耐磨性、热稳定性，并介绍了其在连杆毛坯滚锻模上的应用．结果表明，这种涂层的某些高温性能大大优于５ＣｒＮｉＭｏ钢，在冲击载荷不大的场合，可以作为热锻模的强化方法．     

High temperature corrosion behavior of arc-sprayed aluminum coatings on steel

Aluminum coatings were sprayed on the substrate of steel Q235 by arc spraying. The test samples of Q235, Al coatings and Al coatings with seal coat were placed in box type electric resistance furnace at 400, 500,600, 650 ℃ when their oxidation behaviors were studied. And their oxidation kinetics curves were protracted. Microstructure, microhardness, bond strength and distribution of section elements were investigated by optical microscope(OM), Vickers microhardness instrument, electric tensile test machine and EPMA. Al coatings and Al coatings with seal coat can enhance the oxidation-resistance of substrate under 500 ℃. The latter has the best corrosion resistance. The coatings can't protect the substrate against oxidation above 600 ℃. After a long time corrosion there is enriched oxygen element at interface.     

Characterization of plasma sprayed Fe-17Cr-38Mo-4C amorphous coatings crystallizing at extremely high temperature

A Fe-17Cr-38Mo-4C alloy powder was plasma sprayed by three processes: an 80 kW low-pressure plasma spray (LPPS), a 250 kW high-energy plasma spray (HPS), and a 40 kW conventional plasma spray (APS). The as-sprayed coating obtained by the LPPS process is composed of only amorphous phase. As-sprayed coatings obtained by the HPS and APS processes are a mixture of amorphous and crystalline phases. The three as-sprayed coatings exhibit a high hardness of 1000 to 1100 DPN. The amorphous phase in these coatings crystallizes at a high temperature of about 920 K. A very fine structure composed of hard ϰ-phase and carbides is formed after crystallization. The hardness of the coating obtained by LPPS reaches a maximum of 1450 DPN just after crystallization on tempering and retains a high hardness more than 1300 DPN after tempering at high temperatures of 1173 or 1273 K. The corrosion potential of the amorphous coating is the highest among the three coatings and higher than that of a SUS316L stainless steel coating. The anodic polarization measurements infer that the corrosion resistance of the amorphous coating is superior or comparable to SUS316L stainless steel coating in H₂SO₄ solution.     

Viscosity of compressed cold lake bitumen

Viscosity data over a temperature range of 37-115°C and a pressure range of 0-10 MPa gauge are presented for a Cold Lake bitumen sample. These data show that the compression of Cold Lake bitumen results in a significant increase in its viscosity. Results are compared with those from a similar study on an Athabasca bitumen sample. Also presented are two correlations for the effects of pressure and temperature on the viscosity of Cold Lake bitumen.     

复合型高分子自限温发热材料及元器件在汽车冷启动方面的应用

采用HDPE／CB复合型高分子自限温发热材料制备了适于在汽车上使用的自限温加热带、发热管及相应的加热器，通过实验室模拟试验，研究了加热器的电热特性。在冬季的柴油车冷启动试验表明，组合加热装置对柴油车的冷启动及正常运行非常奏效，所研制的复合型高分子自限温发热材料及元器件用于汽车领域是可行的。